Saturday, June 4, 2016

Arduin Uno as ISP to burn Bootloader to Mega 2560


To burn bootloader to Arduino MEGA 2560 using Arduino Uno as ISP, connect Uno & MEGA as shown:


PC is connected to Uno.

- Program Uno as ArduinoISP
> Select board of Uno
> Select programmer of AVRISP mkII
> File > Examples > ArduinoISP > ArduinoISP
> Upload

- Now we are going to program MEGA, the Uno act as Arduino as ISP.
> Select board of MEGA
> Select programmer of Arduino as ISP
> Tools > Burn Bootloader

As shown in this video:


3 comments:

  1. Óla, depois de gravar o Bootloader, na hora de passar o Sketch Blink eu recebo esse erro:

    avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.01s avrdude: Device signature = 0x1e9801 avrdude: reading input file "C:... avrdude: writing flash (1518 bytes): Writing | ################################################## | 100% 0.25s avrdude: 1518 bytes of flash written avrdude: verifying flash memory against C:.... avrdude: load data flash data from input file C... avrdude: input file C... avrdude: reading on-chip flash data: Reading | ################################################## | 100% 0.19s avrdude: verifying ... avrdude: verification error, first mismatch at byte 0x0084 0x96 != 0xd6 avrdude: verification error; content mismatch avrdude done. Thank you.

    Pode me ajudar?

    ReplyDelete